top of page

ASSEMBLY

vtech logo.png

Threadlocker Blue

Medium Strength​

  • Prevents loosening due to vibration

  • Works on oiled surfaces

  • Locks bolts and nuts up to a 20mm diameter

  • Chemical resistant resisting fuels, lubricants and most industrial liquid and gases.

vtech logo.png

Threadlocker Red

High Strength​

  • Prevents loosening due to vibration

  • Permanent High Strength

  • Locks bolts and nuts up to a 25mm diameter

  • Designed to withstand heavy shock, vibration or extreme chemical or environment conditions

permatex.png

Threadlocker
Blue Gel

Permatex’s Medium-Strength Threadlocker Blue is ideal for all nut and bolt applications 1/4″ to 3/4″ (6mm to 20mm). Threadlocker Blue eliminates need for stocking expensive lock nuts and lock washers and locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Threadlocker BLUE is easily removable with hand tools for easy disassembly. The Gel formula provides “liquid-reliability” without drips, globs, mess or waste.

permatex.png

Threadlocker
Red Gel

Permatex High-Strength Threadlocker Red is ideal for heavy-duty applications 3/8″ to 1″ (10mm to 25mm) Red threadlocker is well-suited for permanently locking studs and press fits. Threadlocker RED adds 3,000 PSI holding power on slip and press fit assemblies, and replaces set screws and snap rings. Permatex’s Threadlocker Red locks against vibration loosening. May require heat or special tools for removal. The Gel formula provides “liquid-reliability” without drips, globs, mess or waste.

permatex.png

Threadlocker Purple

Permatex’s Threadlocker Purple is a low strength threadlocker designed for fasteners under 1/4″ (6mm) that require occasional adjustment. Removable with hand tools for easy disassembly. Threadlocker Purple eliminates vibration loosening, prevents leaks and is non-corrosive

permatex.png

Bearing Mount Relaxed Fit Adhesive

Permatex’s Bearing Mount Relaxed Fit Adhesive is an OEM specified, high strength, medium viscosity anaerobic adhesive for slip fit assemblies. This Relaxed Fit Adhesive provides 2,800 PSI shear strength on steel and fixtures in 10 minutes at room temperature.

permatex.png

Plug Sealant & Retaining Compound

Permatex Permanent Strength Red & Cup/Core Plug Sealant is a dual purpose, permanent-high strength threadlocker that is applied to fasteners 3/8″ to 1″ (10mm to 25mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Also used for sealing and securing cylindrical metal assemblies. Localized heating and hand tools are required to separate parts.

permatex.png

Cold Weld 2 Part Epoxy

Permatex Cold Weld Bonding Compound is a 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted.

permatex.png

Steel Weld Epoxy

Permatex Steel Weld Epoxy is a versatile, easy-to-use, multi-metal epoxy adhesive that eliminates the need for welding or brazing.

permatex.png

Fuel Tank Epoxy

Permatex Fuel Tank Epoxy putty is two part, hand kneadable, putty type epoxy stick used for repairing metal gas tanks and containers. When the contrasting colored materials are mixed together to form a uniform color to indicate thorough mixing. The resulting cured adhesive can be drilled, sanded, threaded or filed and it is resistant to fuels and most solvents after full cure.

bottom of page